+7 383 203-28-12
+7 383 203-28-39
 +7 913-923-66-02
Menu


 

Frequently asked questions about the production of aerated concrete, foam concrete, polystyrene concrete

Cutting-edge Technologies for EPS Concrete and Aerated Concrete Production Cutting-edge Technologies for EPS Concrete and Aerated Concrete Production
Specialized equipment is required for manufacturing EPS concrete and aerated concrete. Such equipment can ensure high quality of products and manufacturing efficiency.
تطبيق الخرسانة الخلوية غير المعقمة في البناء تطبيق الخرسانة الخلوية غير المعقمة في البناء
 
خرسانة البوليسترين الموسع في الشرق الأوسط خرسانة البوليسترين الموسع في الشرق الأوسط
 
Application of non-autoclaved aerated concrete in construction Application of non-autoclaved aerated concrete in construction
Non-autoclaved aerated concrete (NAAC) is a lightweight building material that has gained popularity in recent years due to its advantages over traditional concrete. NAAC is made from a mixture of cement, lime, water, sand, and aluminum powder, which creates gas bubbles that expand during the curing process.
Expanded polystyrene concrete in the Middle East Expanded polystyrene concrete in the Middle East
Expanded polystyrene concrete is a building material made from a combination of cement, sand, water, and expanded polystyrene (EPS) beads. The use of EPS in concrete mixtures creates a lightweight, durable, and energy-efficient material that has been gaining popularity in construction projects around the world.
Inexpensive Equipment for concrete Block Production Inexpensive Equipment for concrete Block Production
Siberian Construction Technologies takes orders for designing and supplying automated plants for aerated, EPS concrete block production and foam concrete block production.
Construction Stages for Aerated Concrete Houses Construction Stages for Aerated Concrete Houses
Light walls made of aerated concrete blocks enable you to do without a robust foundation supported by dense ground layers below the straight freezing point.
Production of EPS Concrete Blocks Production of EPS Concrete Blocks
How to quickly organize the process of manufacturing concrete blocks and ensure stable profits for your company.
Construction of Aerated Concrete Buildings Construction of Aerated Concrete Buildings
Selection of equipment for the production of aerated concrete, depending on the specified production parameters.
Is there any demand for EPS concrete? Is there any demand for EPS concrete?
Apart from low weight and the ability to preserve heat, EPS concrete has some other positive properties.
Equipment for Aerated Concrete Manufacturing Equipment for Aerated Concrete Manufacturing
According to experts, the demand for aerated concrete blocks is steadily growing. Over the past five years, the volume of production and sales of aerated concrete blocks increased almost 10 times.
How to Go into Foam Concrete Block Business How to Go into Foam Concrete Block Business
 
Profitable business is aerated concrete manufacturing Profitable business is aerated concrete manufacturing
Open a business - how difficult is it? Which business to open? Will this business be profitable?
Manufacturing polystyrene concrete bricks Manufacturing polystyrene concrete bricks
What do you need to start the production of polystyrene concrete blocks?
Using aerated concrete offcuts Using aerated concrete offcuts
When manufacturing cellular and light concrete, there is a need to resolve the problem related to recycling offcuts that we get when cutting the sides and the top.
Aerated or foam concrete? What’s better? Aerated or foam concrete? What’s better?
Overview of the possibilities and disadvantages of building materials. What to choose for construction?
Advantages and disadvantages of aerated concrete Advantages and disadvantages of aerated concrete
Advantages and disadvantages, pluses and minuses of blocks from autoclave and non-autoclave aerated concrete.
Compare quality of blocks obtained Compare quality of blocks obtained
The most optimal and effective solution to this issue is usage of cutting complexes equipped with band saws.
Cutting or molding? Cutting or molding?
You get the savings of $10,000 and ability to manufacture products of higher quality